Track; Sport-Specific Settings For Track - Fairplay MP-70 User Manual

TRACK

If track is not the sport currently selected on the MP-70/50, see
on page 151.
CHANGING SPORTS
You should also verify that the controller has been programmed to the correct
scoreboard type and data format as instructed in
S on page 142.
ETTINGS
S -
PORT SPECIFIC SETTINGS FOR TRACK
When you select track the MP-70/50 offer the sport-specific settings discussed
below. When you adjust these settings, the MP-70/50 stores your selections in
permanent memory. Your settings become active each time you select track in
the future.

The sequence shown on the following pages presents you with all of the
options you could encounter while programming sports-specific settings.
However, these options presented to you may vary, depending upon the
type of your control (MP-70 or MP-50), the version number of the
firmware in your control, the two-digit board type that you've selected, or
your scoreboard model. Hence, not all of the options outlined in this
chapter may appear on your control.

As you run through the following programming sequence, and you find
the need to back up to a previous programming option earlier in the
sequence, you can back up by selecting SHIFT + 8 .

You may skip a prompt by pressing the NEXT key. This will advance
you to the next prompt, but will save the existing settings of your current
prompt without making any changes. However, Fair-Play advises that
you respond YES or NO to all prompts, so that you have made all of
the appropriate selections for your sports event.

You may exit the programming sequence at any time by pressing
the ESC key. This will take you to the Quit prompt.
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
S
ELECTING AND
P S
ROGRAMMING THE
Track
YSTEM
65