Range (G3); Factory Presets (G3) - Fairplay MP-70 User Manual

WARNING!
R (G3)
ANGE
The control transmitter must be:
1. Located within range of the
scoreboard receiver.

500 feet indoors

1,500 feet outdoors.
2. Located within a 180° degree arc
in front of the scoreboard receiver
to prevent the scoreboard from
blocking the signal.
Note: The wireless signal is largely immune to conflicting radio frequency signals
from cordless telephones, cellular telephones, microwave ovens and other
radio frequency devices. For more information on interference, see
F
REQUENCY
F
ACTORY PRESETS
The wireless MP-73/53 control has been programmed at the factory to use the
correct scoreboard type, group number and data format as instructed in
P S
ROGRAMMING THE
Note: To establish a communication link, the MP-73/53 and the scoreboard must
be set to the same group number or group and the scoreboard type must
be correct for the scoreboard to function correctly. Refer to
SCOREBOARD GROUP NUMBER
page 126, or to
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
Metal objects between the transmitter and receiver
can block the radiation path or reduce the
transmission distance, so external antennas should
be positioned away from them as much as possible.
Some objects that are often overlooked are:
• metal fencing • metal studs or beams in structures
• metal poles • metal rods in concrete
• vehicles • metal enclosures
• elevators • ventilation ducts
• refrigerators • microwave ovens
• batteries • tall electrolytic capacitors
I
NTERFERENCE
(G3)
S on page 142.
YSTEM ETTINGS
(G3)
S
COREBOARD TYPE
MP-73/53 G3 Wireless Option
on page 133.
on page 123, S
ET GROUP NUMBER
on page 143.
R
ADIO
S
ET
(G3) on
121