Timeouts; Timeout Timer & Alternate 2Nd Timeout (30 Sec.) - Fairplay MP-70 User Manual

Common Functions
T
IMEOUTS

The clock must be stopped before you can begin a timeout.

To change the duration of the timeout timer or to program the timeout
timer to appear on the scoreboard, see the sport-specific settings.

The horn sounds at the end of the timeout only if the timer has been set
to appear on the scoreboard. Depending on the sport and sport-specific
setting, a warning horn may sound before the timeout ends.
T &
IMEOUT TIMER
Follow these steps if a timeout is called during a game.
1. Press the TIME IN switch to Time Out position – this stops the (game)
clock. On the LCD display, the timeout
time-in
2. Select the team to be charged with the
timeout: HOME TIMEOUT or VISITOR TIMEOUT button.
Press button once for the full timeout or
press twice for an alternate 2nd timeout.
The timeout duration is indicated in
parenthesis on the far left 2
LCD display while the number of full
timeouts left (T.O.L.) is indicated on the far
right.
Note: The alternate timeout is used in basketball.
3. Press -1 to start the timeout timer and subtract a timeout from the
timeouts (T.O.L.) counter.
If it is necessary to stop the timeout timer, press -1 again.
4. Press the TIME IN switch to Time In position to resume the game
clock.
18
2
ALTERNATE ND TIMEOUT
or arrow indicator.
nd
line of the
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
(30 .)
SEC
indicator replaces the
BB 60.0 8:00.
(60)V.T.O.
BB 60.0 8:00.00
(30) V. TIMEOUT
1