General Wireless Operating Guidelines - Fairplay MP-70 User Manual

1. Press SHIFT + 9 .
2. When the HIPOWER TRANSMIT prompt
appears, press 4/YES .
3. When the ALL SCOREBOARDS prompt
appears, press 6/NO .
4. When the SELECT CHANNEL NUMBER
prompt appears, you may select either 0, 14, or
15 to turn off wireless, as these channels are
not used. In the example shown, the user has
selected 0.
5. At the last prompt, the settings that you have
selected will display on the LCD screen. In the
example shown, the user has selected Highpower Transmit, and has
selected Channel 0.
Note: The SEL.CHANNEL_0 prompt appears even in ALL SCOREBOARDS
mode. This way, a viable channel number will be used if the control is
changed to SEL channel operation.
6. Remember - You can always review your wireless settings by pressing
the SHIFT + BAT/RF keys. Your current
wireless settings will then appear on the LCD
screen, similar to the example shown.
G
ENERAL WIRELESS OPERATING GUIDELINES

Maintain a clear, unobstructed line-of-sight between the control antenna
and the receiving units. (See
page 85 for more information).

When possible, tune the control transmitter and scoreboard receiver to
the lowest available channel setting.

Also when possible, operate the control with it's TRANSMIT mode switch
set to the SEL position.

If more than one control is in use at a facility, allow for at least one
channel of separation between channel settings, starting with channel 1.
Example:
o
Control 1=Channel 1;
o
Control 2=Channel 3;
o
Control 3=Channel 5, etc.
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
S
ETTING UP THE WIRELESS CONNECTION
MP-70/50 Wireless Option
- TRANS-LUX -
HIPOWER XMIT?Y/N
- TRANS-LUX -
ALL SCBDS? Y/N
- TRANS-LUX -
SEL CHANNEL? 0
- TRANS-LUX -
HIGH, SEL, CHO0
HIGH, SEL, CH0
on
91