Programming Sequence; Adjusting System Settings; Scoreboard Type - Fairplay MP-70 User Manual

P
ROGRAMMING
Initial control programming needs to be performed in the following sequence:
1. SYSTEM SETTINGS programming. Follow instructions on the following
pages.
Note: Your control may already be programmed with a preset configuration. See
C
ONFIGURATIONS
2. CHANGE SPORT programming. Follow instructions under
AND CHANGING SPORTS
Note: Always reset the control for a new game after changing any of the
SYSTEM SETTINGS or CHANGE SPORT settings. Follow instructions
NEW GAME
under
A S
DJUSTING YSTEM
Follow these steps to adjust the system settings:
1. Turn off the MP-70/50.
2. Press and hold the zero 0 key while turning on the MP-70/50.
S
COREBOARD TYPE
The MP-70/50 must be properly configured for the type
of scoreboard it is controlling. The SCBD TYPE prompt
indicates the scoreboard type currently selected. In the
example shown, the current scoreboard type number is 7.
Note: The MP-50 operates scoreboard types 00, 25-32, and 36 only. See
B
OARDS SUPPORTED
If you want to keep the current setting, press SHIFT + NEXT . Otherwise,
locate the scoreboard type number for your scoreboard listed under
on page 147. Enter this number at the SCBD TYPE prompt and then
SUPPORTED
press ENTER .
If you do not see your scoreboard model number in the tables listed under
B
OARDS SUPPORTED
C
ONTACTING THE HELP DESK
Some scoreboards offer features that require special equipment in addition to the
MP-70/50. For example, electronic team names (MP-70 only) or a time of day
clock require additional equipment.
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
S
EQUENCE
on page 163 to load an existing configuration.
on page 151.
on page 20.
S
ETTINGS
on page 147 for more information.
on page 147 , contact the Trans-Lux Help Desk. See
on page 6 for more information.
Programming the System Settings
S
ELECTING
SYSTEM SETTINGS
SCBD TYPE #?
B
OARDS
7
143