Settings; Selecting Display Language; Boat Details - Raymarine AXIOM Advanced Operation Instructions

4.6 Settings

The Settings menu contains important information and settings for your MFD.
The Settings menu is split up into different tabs, the settings available are:
Tab Options
• View hardware and software information about your MFD.
Getting started
• View cartography details for inserted chart cards.
• Update MFD software
• View the LoU disclaimer (Getting started tab).
• Change the user interface language
• Set boat icon and name.

Boat details

• Configure Minimum safe depth, height and width.
• Configure engines.
• Configure batteries.
• Configure fuel tanks.
Units • Configure preferred units of measurement.
• Configure Bearing mode.
• Configure variation.
• Configure GNSS system datum.
• Assign a Homescreen page or app to start on power up.
This display
• Select save location for screenshots.
• Pair/unpair with a RMK external keypads.
• Pair with a wireless Quantum Radar scanner.
• Perform a Settings or Factory reset.
Network • View list of networked MFDs.
• Assign a MFD Data master.
• View software and network details for the MFD you are using.
• Save or Erase diagnostics logs to external storage.
• Assign your preferred data sources.

Selecting display language

You can choose which language you want the MFD to use.
1. Select the Language button from the Getting started tab: Homescreen > Settings > Getting
started.
2. Select your desired language.
Boat details
To ensure correct operation and display of data you should set the Boat Details settings according
to your requirements.
Boat details can be accessed from the Settings menu: Homescreen > Settings > Boat Details
Option
Boat /Icon:
Boat Name:
Homescreen
Description
Selection determines the icon used to signify your vessel in
the Chart app.
Configures your system with your vessel's name.
33