Shortcuts; Adjusting Brightness; Taking A Screenshot; Activating Touchlock - Raymarine AXIOM Advanced Operation Instructions

Hide thumbs Also See for AXIOM:

Table of Contents

3.3 Shortcuts

The Shortcuts menu can be accessed by swiping left to right across the Power button swipe area.

The following shortcuts are available:

• Take Screenshot

• Activate Touchlock

• Stop Radar transmitting

• Power off

• Adjust Brightness

LCD brightness can be adjusted from the Shortcuts menu.

1. Swipe your finger from left to right across the Power button swipe area.

The Shortcuts menu is displayed

2. Move the Display brightness control along the slider bar to adjust the brightness.

With the Shortcuts menu displayed you can also use the Power button swipe area to increase the

brightness level in increments, by repeating the left to right swipe.

You can take a screenshot and save the image to external memory.

1. Swipe your finger from left to right across the Power button swipe area.

The Shortcuts menu is displayed.

2. Select Take screenshot.

The screenshot will be saved in .png format to the Screenshot file location. The Screenshot file

location can be selected from the This Display tab located in the Settings menu: Homescreen

> Settings > This Display > Screenshot file:.

In rough weather conditions precipitation may lead to erroneous touches being detected by the

touchscreen. In these conditions you can use touchlock to prevent this.

1. Select Activate touchlock from the Shortcuts menu.

With touchlock activated the touchscreen will be disabled. To re-enable the touchscreen, swipe

from left to right across the Power button swipe area.

You can place a transmitting Radar in Standby from the Shortcuts menu.

1. Select Stop Radar tx from the Shortcuts menu.

Set up

Table of Contents