Raymarine AXIOM Advanced Operation Instructions page 108

Installation tab
Under normal circumstances it should not be necessary to adjust Installation settings.
Settings
Bearing alignment
Parking offset
Main Bang
Suppression (MBS)
Sea clutter curve
Advanced tab
Under normal circumstances it should not be necessary to adjust Advanced settings.
Settings
Tune preset
STC preset
Zero range
Reset
Page settings tab
Settings
Data Overlays
Edit split ratio
108
Description
Enables you to align the Radar image correctly
in relation to your vessel's bow.
Allows you to select the 'parked position of your
Open Array's antenna
The Open Array must be in Standby to adjust the
parking offset.
MBS eliminates saturation immediately around
your vessel. When adjusting Zero range it is
recommended that MBS is set to Off.
Adjusts the Radar scanners sensitivity to Sea
clutter.
Description
Radar tuning is controlled either automatically or
manually, using the Tune adjust setting. Tune
preset controls the range available to the Tune
adjust control.
The Sensitivity Time Control (STC) can be used
to equalize targets across the image. If you find
targets are brighter or dimmer nearer the center
of the image adjust the STC preset until the
desired result is achieved.
Zero range (Display timing) is used to configure
the zero range of the Radar scanner so that
objects appear at the correct distance.
Resets Installation and advanced settings to
factory defaults.
Description
Enables configuration of Data overlays
Enables you to customize the position of the partitions in
splitscreen app pages.
Options
• 179.5° Port to 180°
Starboard
• 0° to 359°
• Off
• On
• 1 to 8
Options
• 0 to 255
• 0% to 100%
• 0 to 153m / 502ft
• Yes
• No