General Safety Warnings - Blaupunkt GT4000 Instruction Manual

GENERAL SAFETY WARNINGS

WARNING! When using power tools, basic safety precautions
should always be taken to reduce the risk of re, electric shock
and personal injury. Also, please read and heed the advice given
in the additional safety instructions.
1. Keep the workplace clean and tidy, cluttered work areas invite accidents
and injury.
2. Consider the environment in which you are working. Do not use power
tools in damp or wet locations. Keep the work area well lit. Do not expose
power tools to rain or high humidity. Do not use power tools in the
presence of ammable liquids or gas.
3. Keep visitors away from the worksite. All visitor and onlookers,
especially children and in rm persons should be kept well away from
where you are working. Do not let others in the vicinity make contact with
the tool or extension cord.
4. Store tools safely. When not in use tools should be stored in a dry, high
place or locked up out of the reach of children.
5. Do not force the tool. The tool will do the job better and more safely
working at the rate for which it was designed.
6. Use the correct tool for the job. Do not force small tools or attachments
to do the job best handled by a heavy duty tool. Never use a tool for a
purpose other than that for which it was intended.
7. Dress correctly. Do not wear loose clothing or jewellery, they can get
caught in moving parts. Rubber gloves and non-slip footwear are
recommended when working outdoors. If you have long hair wear a
protective hair covering
8. Use safety accessories. Safety glasses and ear protectors should always
be worn. A face or dust mask is also required.
9. Do not abuse the power cord. Never pull the cord to disconnect the tool
from the power point. Keep the cord away from heat, oil and sharp edges.
10. Look after your tools. Keep tools clean for better and safer
performance and follow the instructions regarding lubrication and
accessory changes. Inspect extension cords periodically and replace them
if damaged. Keep tool handles dry, clean and free from oil and grease.
GENERAL SAFETY WARNINGS
11. Disable idle tools. Switch o the power and disconnect the plug from
the power before servicing, when changing accessories and when the tool
is not in use.
12. Avoid unintentional starting. Always check that the switch is in the OFF
position before plugging in the tool to the power supply. Do not carry a
plugged in tool with your nger on the switch.
13. Use outdoor rated extension cords. When a tool is used, use only
extension cords that are intended for outdoor use and are so marked.
14. Stay alert. Watch what you are doing. Use common sense. Do not
operate a power tool when you are tired.
15. Check for damaged parts. Before using a tool, check that there are no
damaged parts.
If a part is slightly damaged, carefully determine if it will operate properly
and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of part's proper mounting and any
other conditions that may a ect the operation of the tool. A guard or
other part that is damaged should be properly repaired or replaced by an
authorised service facility unless otherwise indicated in this Instruction
Manual. Defective switches must be replaced by an authorised service
facility. Do not use a tool if the switch does not turn the tool on and o
correctly.
16. Guard against electric shock. Prevent body contact with grounded
objects such as water pipes, radiators, cookers and refrigerator enclosures.
17. Use only approved parts. When servicing use only identical
replacement parts. Use an authorized service facility to t replacement
parts.
18. Be aware of the harmful/toxic dusts arising from grass trimming etc,
(e.g. fertilizers, insecticides).
19. The use of improper accessories or attachments other than
recommended can lead to personal injury.
1 2