Table of Contents
Advertisement
OPERATIONS
Preparing the Trimmer For Use
Note: To avoid detaching power cable always check that it is attached
rmly to cable hook , before using trimmer.
1. Make a loop with the power cable and push it through the square hole
under the grip of the trigger.
2. Place the end of the loop round cable hook and ensure it is pulled rmly
enough to prevent it coming loose while operating the trimmer.
Operating the trimmer
1． To switch on the trimmer rst press the On/O trigger. To switch o
simply release the On/O switch trigger.
2. The lawn trimmer comes with a full spool of line real. The line wears
down during work. If you nd that the nylon line is too short, switch the
machine on and press the head of the line cassette rmly against the
ground, the line will automatically be released by the centrifugal force.
The trimmer line will be cut to the right length by the blade on the lime
cover.
3. Do not overload the trimmer, cut in small sections which will greatly
improve e ciency by keeping the trimmer running at high speed,
4. For the correct cutting action, swing the line trimmer from side to side
as you walk forward, holding it at an angle of approx. 20° as you do so.
OPERATIONS
5. Make several passes to cut long grass shorter step by step from the top.
(Fig. H)
6. Keep the line trimmer away from hard objects in order to avoid
unnecessary line wear.
7. Use the edge of the guard as a guide when cutting near fences and
walls, etc. Moving trimmer in a backwards direction will avoid damage
(Fig. I)
G
K
11
H
I
12
Advertisement
Table of Contents
