Blaupunkt GT1000 Instruction Manual
Blaupunkt GT1000 Instruction Manual

Blaupunkt GT1000 Instruction Manual

Hide thumbs Also See for GT1000:

Advertisement

WARRANTY
This product has 3 years warranty for manufacturing defects. The warranty period
will be counted from the date of purchase of the product, according to purchase
invoice. Product warranty only covers manufacturing defects, defects resulting from
improper use, such as dropping, improper transportation, connection to the mains
power supply not in compliance with the voltage speci ed in this manual, insertion
of foreign objects and natural wear of parts and parts Such as plastic parts (caps,
buttons, handles, latch locks, power cables, etc.) and metal parts (wires, motors, etc.).
Also not covered are damages due to agents of nature, lightning, ood, sea,
oxidation, humidity etc.). The product will lose its warranty if it presents defects,
which after analysis by our technicians, are characterised as being improperly used,
used for professional use or for the purpose for which it is not intended (according to
the Owner's Manual). This warranty will be void if it is found that the device has been
tampered with, has been repaired by a person or service not authorised by
Blaupunkt. The guarantee is only valid with the receipt/invoice provided at purchase.
Blaupunkt undertakes to provide the above-mentioned services in the warranty
period only in places where it maintains an authorised service. Consumers who are
not located near an authorised service centre should be responsible for the costs and
risks of transport to the authorised service of their choice.
Natural wear is not covered under warranty.
This product is for domestic use only.
SAVE THESE INSTRUCTIONS
0800 677 1923
customerservice@bp-tools.co.uk
www.bp-tools.co.uk
Imported and Distributed by SKN Innovations Ltd. for Blaupunkt
17 Northumberland Sq.
Registered in the UK - Company Number 10366861
NE30 1PX
INSTRUCTION MANUAL
To prevent injury or damage, read
and follow all instructions in this
manual before using the appliance.
Grass Trimmer GT1000

Advertisement

Table of Contents
loading

Summary of Contents for Blaupunkt GT1000

  • Page 1 Owner's Manual). This warranty will be void if it is found that the device has been tampered with, has been repaired by a person or service not authorised by Blaupunkt. The guarantee is only valid with the receipt/invoice provided at purchase. Blaupunkt undertakes to provide the above-mentioned services in the warranty period only in places where it maintains an authorised service.
  • Page 2: General Safety Warnings

    GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS Risks caused by vibrations When used for its intended purpose, this device corresponds to the state of the art, as well as to the current safety requirements at the time of its introduction. CAUTION! This unit may only be used with the permitted original cutting tools to cut grass and light weeds on trees, walls, posts, lawn edges and other locations di cult to access with a lawn mower.
  • Page 3 GENERAL SAFETY WARNINGS DESCRIPTION FOR THE PRODUCT The tool may only be used within the speci ed limitations for voltage and power (see type plate). Do not touch the mains plug with wet hands! Always pull out the mains plug at the plug and not by the cable. Do not bend, crush, pull or drive over the power cable, protect from sharp edges,oil and heat.
  • Page 4: Know Your Product

    KNOW YOUR PRODUCT KNOW YOUR PRODUCT 8 (Bolt 8 (Bolt...
  • Page 5: Maintenance

    OPERATIONS MAINTENANCE Before conducting any maintenance on the device, disconnect the mains plug. Only those maintenance and fault elimination tasks described here may be carried out. Any other tasks must be completed by a specialist. Only use original replacement parts. Only these replacement parts are designed and suitable for the device.
  • Page 6: Scope Of Delivery

    DEVICE-SPECIFIC SAFETY INSTRUCTIONS SYMBOLS Pay attention when walking backwards. Danger of stumbling! Danger of injury from ying parts! The cutting tool will continue to rotate even after the engine has been Always maintain a su ciently safe distance. switched o . Risk of injury caused by the cutting blades! After pulling out a new thread, always keep the machine in the normal working position before switching on.
  • Page 7: Operation

    OPERATION CUTTING TIPS Check before starting the device! DANGER! Risk of injury! The device may only be put into operation if there are no defects. If a part is defective it must be replaced before the device is used again. WARNING! Only cut with the left (shown here as light grey) area of the cutting unit Risk of injury!
  • Page 8: Cleaning And Maintenance

    LENGTHENING THE THREAD CLEANING AND MAINTENANCE OVERVIEW When the unit no longer cuts cleanly, the threads have become too short. Note: Clean unit immediately after every use. Dried grass remains are very The best cutting results are obtained when the thread is lengthened far hard, and are very di cult to remove.
  • Page 9: Troubleshooting

    CLEANING AND MAINTENANCE TROUBLESHOOTING To Clean PROBLEM POSSIBLE CAUSE SOLUTION - Regular cleaning and maintenance of you grass trimmer will ensure Line will not 1. Line is welded to itself. 1. Lubricate with a silicone spray. e ciency and prolong the life of your machine. advance when 2.
  • Page 10: Technical Data

    TROUBLESHOOTING TECHNICAL DATA Type - GT1000 Waste electrical products should not be disposed of together Voltage - 230-240V~50Hz with household waste. Please recycle where facilities exist. Check Rated power - 250W with your local authority or retailer for recycling advice.

Table of Contents