Table of Contents
Advertisement
Gas supply
A suitable gas supply needs to be provided at the right hand rear corner of the fi replace cavity. The pipe sizing
should be calculated to supply gas to suit the megajoule rating of the fi re. See rating chart. The gas supply should
be reduced down to 10mm copper pipe at the fi replace location and left with a 10mm coil of approx 1metre to
feed into the fi rebox.
Model
650
700
800
900
1000
1200
Electrical supply
An electrical supply will required for fi res fi tted with the optional Fan Set or Electric On/O . This should be by
means of a wall switch provided by an electrician and located near the fi replace. Not inside the fi replace cavity.
Recommendation
Performance of the fi re will be improved if the fi replace cavity is lined with a suitable insulating fi re rated product
such as Rockwool.
600mm Fire
650mm Fire
700mm Fire
800mm Fire
Gas Rate Chart
LPG
36 MJ/h
34 MJ/h
42 MJ/h
50 MJ/h
51 MJ/h
65 MJ/h
Cowl Requirements
150mm Cowl
150mm Cowl
150mm Cowl
200mm Cowl
900mm Fire
1000mm Fire
1200mm Fire
Natural Gas
38 MJ/h
39 MJ/h
40 MJ/h
40 MJ/h
47 MJ/h
53 MJ/h
200mm Cowl
200mm Cowl
250mm Cowl
realfi res.co.nz
Advertisement
Table of Contents
