Table Of Contents; Compressor Requirements - Kobalt SGY-AIR185 Manual

TABLE OF CONTENTS

Compressor Requirements.............................................................................2
Product Specifications....................................................................................3
Safety Information..........................................................................................3
Package Contents........................................................................................10
Preparation...................................................................................................10
Assembly Instructions...................................................................................11
Operating Instructions..................................................................................13
Care and Maintenance.................................................................................14
Troubleshooting............................................................................................15
Warranty.......................................................................................................16

COMPRESSOR REQUIREMENTS

5.3 90
@
SCFM PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
IMPORTANT: To operate correctly, this tool requires airflow of at least
5.3 Standard Cubic Feet per Minute(SCFM) at 90 Pounds per Square
Inch (PSI).
Air hoses may cause loss in pressure up to 15 PSI, requiring a higher
compressor output to compensate and maintain required pressure at the tool.
Check the specifications of your air compressor to be sure it can support
both the SCFM and PSI required by this specific tool.
2
kobalttools.com