Adjusting Hand And Day Indicator Alignment; Configuring Watch Settings; Changing The Home City Summer Time Setting - Casio QW 5531 Operation Manual

Configuring the Summer Time Setting
●
1.
Y Tap the "MR-G Connected" icon.
2.
X Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
"C" and establishes a connection
between the watch and phone.
The second hand will point to "N" if
●
connection fails for some reason.
3.
Y Perform the operation shown on the
phone screen to configure the summer
time setting.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch
between standard time and summer
time automatically. You do not need
to switch between standard time and
summer time manually. Even if you
are in an area that does not observe
summer time, you can leave the
watch's summer time setting as
"Auto".
Changing the time setting manually
●
with a watch operation will cancel
auto standard time/summer time
switching.
For information about summer time
●
periods, refer the "Summer Time
Table" or MR-G Connected.
Swapping Your World Time and Home
●
Time
1.
Y Tap the "MR-G Connected" icon.
2.
X Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
"C" and establishes a connection
between the watch and phone.
The second hand will point to "N" if
●
connection fails for some reason.
Operation Guide 5531
3.
Y Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
Before swapping
Home City (Tokyo)
World Time City
(New York)
Note
Auto time adjustment does not work
●
for 24 hours after swapping of the
Home Time and World Time.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or date indicator are out of
alignment even though auto time adjustment
is being performed, use MR-G Connected to
adjust them.
1.
Y Tap the "MR-G Connected" icon.
2.
X Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
"C" and establishes a connection
between the watch and phone.
The second hand will point to "N" if
●
connection fails for some reason.
3.
Y Perform the operation shown on the
phone screen to correct hand and date
indicator alignment.

Configuring Watch Settings

You can use MR-G Connected to specify the
amount of time until the Bluetooth connection
is automatically terminated, and to configure
other settings.
1.
After swapping
2.
Home City (New York)
World Time City
(Tokyo)
3.
Changing the Home City
Summer Time Setting
1.
2.
3.
Y Tap the "MR-G Connected" icon.
X Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
"C" and establishes a connection
between the watch and phone.
The second hand will point to "N" if
●
connection fails for some reason.
Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
Y On the Home Screen, tap the "MR-G
Connected" icon.
X Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
"C" and establishes a connection
between the watch and phone.
The second hand will point to "N" if
●
connection fails for some reason.
Y Perform the operation shown on the
phone screen to change your World Time
summer time setting.
12