Configuring Alarm Settings; Enabling/Disabling The Alarm; Stopping An Alarm; Illumination Light - Casio QW 5531 Operation Manual

Configuring Alarm Settings

1.
Pull out the crown to the first click.
This turns on the alarm.
2.
Rotate the crown to change the alarm time
setting.
Alarm on Minutes
Hours
3.
Push the crown back in.
4.
Press (C) once to return to the
Timekeeping Mode.

Enabling/Disabling the Alarm

1.
Press (B) to toggle the alarm between on
and off.
Alarm off
Alarm on
2.
Press (C) once to return to the
Timekeeping Mode.

Stopping an Alarm

While the alarm is sounding, press any button
to stop it.
Operation Guide 5531

Illumination Light

The watch has an LED light that you can turn
on for reading in the dark. When you turn on
the LED light, it gradually becomes brighter.
After about two seconds, it gradually becomes
dimmer until it turns off.
Getting ready
Enter the Timekeeping Mode or Alarm Mode.
Navigating Between Modes
l
Timekeeping Mode
Crown
Turning On the Illumination
Light
Pressing (A) turns on the light.
The LED light will turn off automatically if the
●
alarm starts to sound.
The LED light is disabled while the hands
●
are moving at high speed.
Adjusting Hand and
Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
The watch performs alignment of the hour
●
hand, minute hand, second hand, and 24-
hour hand automatically.
Alarm Mode
Adjusting Hand and Day
Indicator Alignment
1.
Pull out the crown to the second click.
2.
Hold down (B) for about five seconds, until
the second hand moves to 12 o'clock.
This will start alignment of the hour hand,
minute hand, second hand, and 24-hour
hand.
After auto alignment is complete, the
●
hands should be in the positions shown
below.
3.
Press (C).
Confirm that the small hour hand and
small minute hand are stopped at 12
o'clock.
Day Indicator

Alignment

24-hour hand
Minute hand Hour hand
Crown
Second hand
Small hour hand Small minute hand
18