Checking The Receive Operation Result; Using The Watch In A Medical Facility Or Aircraft - Casio QW 5531 Operation Manual

Using a Phone to Adjust the Watch's Time
You can pair the watch with a phone to have
the watch adjust its time setting in accordance
with the phone time.
Auto Time Adjustment
l
If the watch is not showing the correct
●
time...
If the watch does not indicate the correct time
even after it receives a signal or connects with
the phone, correct the hand and date indicator
positions.
Using MR-G Connected to Make
l
Adjustments
Using Watch Operations to Make
l
Adjustments
Checking the Receive
Operation Result
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
Operation Guide 5531
2.
Press (B).
The second hand points to the letter that
indicates the result of the last time
adjustment operation that was performed
by receipt of a signal or connection with a
phone.
"Y(YES)": Last time adjustment operation
successful.
"N(NO)": Last time adjustment operation
failed.
The day of the week hand indicates
details about the receive (acquisition)
operation.
"P": GPS signal time or phone time
information and location information
"N": GPS signal time information or time
calibration signal
Day of the week hand
Note
Even if there was a successful
●
receive operation, the second hand
will point to "N(NO)" if you adjusted
the time setting manually.
If you do not perform any watch
●
operation for about one or two
seconds after location information is
acquired or after establishing a
connection with a phone and
adjusting the time, the watch will
display the acquired Home City and
the day of the week hand will indicate
the rough latitude of your current
location.
North Pole
Latitude
Equator
South Pole
Second hand
Home City
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto signal
receive or connection with a phone may cause
problems, you can perform the procedure
below to disable it (Airplane Mode). To re-
enable auto time adjustment, perform the
same operation again.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (B).
The second hand points to the letter that
indicates the result of the last time
adjustment operation that was performed
by receipt of a signal or connection with a
phone.
3.
Within 10 seconds after pressing (B)
above, pull out the crown to the first click.
If more than 10 seconds elapse before
●
you pull out the crown after you press
(B), the second hand will return to
indicating seconds. If this happens,
press (B) again.
4.
Rotate the crown to enter the Airplane
Mode.
N(NO): Airplane Mode enabled
Y(YES): Airplane Mode disabled
Crown
6