Wi-Fi Connection - Canon Selphy CP1300 User Manual

• Keep the printer near the access point, without objects between them.
• Confirm that the password is correct, and try connecting again.
•
Confirm that the access point channel is between 1 – 11. Instead of auto channel
assignment, it is advisable to specify a channel in this range manually. For instructions
on checking or adjusting the settings, refer to the access point user manual.
• If the access point filters communication by MAC or IP addresses, on the access point,
register the printer information shown when you check the settings
For instructions on checking or adjusting the settings, refer to the access point user
manual.
•
In WEP networks without DHCP, set the IP address manually
Cannot connect via Wi-Fi
• Try restarting SELPHY. If a connection still cannot be established, check the settings
of the access point or other device for the Wi-Fi connection.
• If WPS connection is not possible, try connecting by using [Search for an access
point] (= 58) or by selecting [Manual Settings] when connecting via an access point
(= 58).
Can connect to access point, but cannot print
• Remove any inserted memory cards or USB flash drives.
•
Printing is not possible when the printer is already printing a job from another device,
or when the printer is connected to a camera.
•
Confirm that the camera, smartphone, or computer you are printing from is connected
to the same access point as SELPHY.
•
Check the access point password and try to connect again
• If a message is displayed after you enter the correct password and press the <o>
button (= 59), confirm that DHCP server functionality is enabled on the access
point, and make sure connection settings on SELPHY such as the IP address are
correct (= 53).
• Check the access point settings to confirm that communication between the devices is
allowed.
72
(= 53).
(= 53).
(= 52).