Advertisement
press "9" for reverse video/image.
press "7" for forward video/image.
press "0" for voice menu replay. The main host will replay PTZ controlling voice menu again.
press "*" for back on main voice menu directory.
Please don't forget to press "#" for exiting phone operation&confirm the alarm!
If you hang up the phone without pressing "#", the main host won't stop alarming. It
will dial next group alarm phone number by turn, or re-dial the alarm phone number. It
will stop dialing for alarm until up to totally 15 times.
3. How to control when remotely dialing in
Use 3G mobile phone to dial visual phone call to the alarm system, it will automatically
answer after 3 rings. If it is set password protection function, you will hear voice indication
"Please input password" (4 digits password, factory default setting: 1234.) within 5s. If you
input wrong password, you will hear voice remind: "Wrong password, please input again." 3
times wrong password input will hang up the phone. When you input password, each key
input you will hear one sound beep from the phone, if you don't hear beep voice within
2s please press the key again. (If you turn off the remote control password protection
function, no password needed here.)
If password correctly input, you can view the video around the video alarm systems and hear
voice menu playing. Please don't forget to press "#" to exit phone operation!
4. SMS remote control function
You can use SMS to control the 3G alarm system except. But it must use the command as
below, if the SMS is identified and operation successful, it will automatically feedback you one
related SMS. The SMS command is start with password + some word, the SMS command
support like below: (Note: All the SMS/MMS command letters must be in capital writing.)
ARM: PASSWORD+ARM (e.g 1234ARM) If successful,feedback SMS: "Host is activated!"
DISARM: PASSWORD+DISARM (e.g 1234DISARM) If successful,feedback SMS:"Host is
deactivated!"
SIREN ON: PASSWORD+ONSIREN (e.g 1234ONSIREN) If successful,feedback SMS:"Siren
is on!"
SIREN OFF: PASSWORD+OFFSIREN (e.g 1234OFFSIREN) If successful,feedback SMS:
"Siren is off!"
To get MMS: PASSWORD+MMS+S(176*144),M(320*240),L(640*480)
E.g 1234MMSS, If successful,you will get MMS from spot after 2 minutes.
If only sending 1234MMS, it will send MMS of size 176*144 by default.
5. MMS Network Parameter Setting:
If you don't know the MMS parameter,please consult with your local communication operator,
the default setting are basing on China Unicom MMS parameter.
1) Setting GPRS Access Point Name and password:
Sending SMS to 3G main host: password+APN+"APN"+,+"user name"+,+"password"
22
Advertisement
