Summary of Contents for 3G TX-3G01
-
Page 1: User Manual
3G Video Alarm System User Manual For your fully understanding, please read the details of this user manual before using. If any difference on appearance, please make the object as the standard.If any function with improvement, maybe without prior informed. - Page 2 1, This product use the most popular world wide network W-CDMA. 2, If the place has 3G signal, the image is clear and smooth, If there is no 3G signal, the system will automatically switch to 3G mode. 3, This system has 1CH video camera by itself, lens optional, visual distance is depending on the lens.
- Page 3 The USB data cable is included in 3G standard package,which is used for connecting PC to setup the functions of the 3G main host.If buyers would like to operate the system by wireless keypad, please purchase keypad from our distributors.
- Page 4 (Figure 1: back side connection) (Figure 2: 3G main host structure) 1:Power slot 2:GSM/3G Network 3: System state 4: USB PC setup indication LED indication LED connector 5: RF antenna 6:External speaker 7: external siren 8:T-FLASH card slot connector 9: USIM card slot...
- Page 5 Network light working instruction: a. If the network light is normal on, it indicates no 3G signal or no 3G WCDMA SIM card. b. If the network light flashes every 1s, it indicates there is GSM signal or 3G signal.
- Page 6 most inside, then release is ok. Pop up: Use finger to press SIM card or T-Flash card, then release, to get the card out of the system. 2. How to install Door/Window Sensor (Fig 3) A. Door sensor is consisted of two parts: transmitter part and magnetic part .You can fix them with screws or adhesive.You need to check the LED side of transmitter part against the magnetic part .
- Page 7 Chapter Four: Function Setting and Program via USB NOTE: The PC setting software CD is included in the 3G standard package, you can copy all the files into your PC and then set up this software and set all the 3G system functions on PC easily! 4.1 Power on the 3G camera with power adapter, connect the camera to your PC with USB...
- Page 8 MMS picture will send. by default setting 6) Signal mode setting: Can choose "Automatic"( It means 3G signal is in priority if there is 3G signal, when there is no 3G signal, it will automatically switch to 2G mode.) or "WCDMA Only"...
- Page 9 13) Start record when arm: When press button " " on remote controller, the 3G main host will record to TF Flash card, when press " " on remote controller, the 3G main host stop recording. Choose this function as follow:"...
- Page 10 13800138000. When system alarming, it will auto dial ordinary audio call to you. 2) Set 3G audio and video alarm phone numbers, you should add the letters 3G in front of the mobile phone number as above interface shows you: 3G13800138000. When system alarming, it will auto dial video call to you.
- Page 11 4) Set MMS phone numbers: The 3G system will send MMS with pictures to the pre-setting MMS phone number when alarm happen. You can input the MMS phone number as above interface show you. After setting, please click to save all the settings.
- Page 12 Click "Press To Set" is OK. If you would like to close the wireless siren, please input the ID code as 00000000. 4.7 Click to check alarm history records: This 3G alarm system can only support latest 50pcs alarm history checking. Showing as below:...
- Page 13 4.8 Arm/Disarm by computer operation: Click this button 4.9 Click to set arm/disarm time: 1)You can set 3 groups of arm time and 3 groups of disarm time, then the 3G system will arm/disarm automatically at the specific time. Showing as below:...
- Page 14 E.g Setting 1 group timing arm/disarm: Every day to arm from 9:00 and disarm until 17:30. Showing as below: Press to save setting. E.g Setting 2 group timing arm/disarm: Monday to arm from 9:00 and disarm until 18:00. Showing as below: Press to save setting.
- Page 15 Wireless keypad need to match/code with 3G alarm system before using,operate like this: Press "RESET" button in the bottom of the 3G system, the main host will make a sound "B" per second,at this moment press "#" on the keypad,the main host will make a sound of "BB",it means matching/coding successfully.
- Page 16 C. Alarm SMS number setting This system support 3 SMS alarm phone numbers. When main panel is in standby status, input “#0*0(1 ～ 6 )*phone number# ” on the wireless keypad, main panel will BEEP when you press every key. Two BEEP indicate alarm SMS number setting ok.(1～6 means No.1 to No.6 alarm SMS number.) For example, if your phone number is 13800138000 and you want to set it to be the NO.1 alarm D...
- Page 17 1) Zone number: Can be set as 00~99 zone numbers 2) Sensors’ name code: "1" - Remote control, "2" - PIR, "3"- Door sensor, "4" - Smoke detector, "5" - Gas detector, "6" - IR beams, "7" - Water sensor, "8" - Heat detector. "9" -- glass breaking sensor, "0"...
- Page 18 When main panel is in standby status, input “#9* 2 (1/0) # ” on the wireless keypad, main panel will BEEP when you press every key. Two BEEP indicate this function setting ok. Note: 1) #9* 2 1 # Turn ON the Remote control opration audio 2) #9* 2 0 # Turn OFF the Remote control opration audio 3) Then when you press any key on the remote control, the mini siren will sound at the same time.
- Page 19 At this moment, users can choose 3G Only, you can operate on keypad like this: "＃ 9*13 ＃ ", the main host will sound "BB" to indicate operation successfully. (Please note: If choosing 3G Only, if there is no 3G signal, the main host won't switch to 2G network.) If setting 3G automatically(When there is no 3G signal, it will switch to 2G signal), operate like this: "＃...
- Page 20 3) Sending SMS to alarm SMS phone number preset, e.g.: 03 zone door sensor alarm, it will send SMS like this: Wireless Alarm in zone NO.03!! (Door sensor) 4) Sending one MMS picture to alarm MMS phone number preset, MMS title like this: "3G Alarm".
- Page 21 3. How to control when you receive alarm calling 1) When alarm happens, the siren will hoot to warn neighbours, and the video alarm main panel will auto dial the preset 6 alarm phone numbers. If it is set visual phone call, when you answer the alarm calling, you can view the video around the video alarm system, you can hear alarm voice menu indication also.
- Page 22 Please don't forget to press "#" to exit phone operation! 4. SMS remote control function You can use SMS to control the 3G alarm system except. But it must use the command as below, if the SMS is identified and operation successful, it will automatically feedback you one related SMS.
- Page 23 B. Wrong video talking alarm number or your number is not in the 3G service area. C. The system haven’t enter 3G network. Please look at the rear of the camera, if the red STATE light flicker every 5s, it indicate 3G signal is ok; if not, no 3G signal.
-
Page 24: Chapter Eight: Technical Parameters
Rotation speed: Horizontal about 12°/S, Vertical about 12°/S. up, down, left, right, auto Siren: ~120dB(12V) Support standard WCDMA 64kbps(CS) Video Call Compatible communication mode: HSDPA/UMTS/EDGE/GPRS/GSM Operating frequency: 3G network model E: UMTS/USDPA 900/2100MHz 3G network model A: UMTS/USDPA 850/1900MHz 2G/2.5G network: GSM/GPRS/EDGE 850/900/1800/1900Mhz Output power: -UMTS 900/2100: 0.25W -UMTS 850/1900 : 0.25W... - Page 25 2. Standard Package: 3G video alarm 1pcs(including camera bracket 1set), remote controller 2pcs, door sensor 1pcs, PIR motion sensor 1pcs, wireless keypad 1pcs, mini siren 1pcs, external speaker 1pcs, USB data cable 1pcs, power adapter 1pcs. NOTE: 1. This device should installed at a dry and ventilated place, should get rid of direct sunshine, high temperature and strong magnetic field interfere place.