Advertisement
1) Zone number: Can be set as 00~99 zone numbers
2) Sensors' name code: "1" - Remote control, "2" - PIR, "3"- Door sensor, "4" - Smoke
detector, "5" - Gas detector, "6" - IR beams, "7" - Water sensor, "8" - Heat detector. "9" --
glass breaking sensor, "0" -- other wireless sensors.
3) Sensors' alarm mode code:
"1" -- Arm(Only in arm status, the sensors will alarm when it is triggered)
"2" -- Bypass(In arm status, the sensors which bypass won't alarm when it is triggered)
"3" -- Disarm (When in disarm status, the sensors won't alarm when it is triggered)
"4" -- Emergency (24hrs monitoring/alarm whether in arm or disarm status)
For example:
Coding remote control: "#9*90+password+#"
Coding PIR: "#9*90+password+02+2+2 + # " (02 defense zone, Bypass mode, so PIR can be
disarmed seperately with double press
key on the remote control.)
Coding Door sensor: "#9*90+password+03+3+1 + # " (03 defense zone, arm mode)
Coding Smoke detector: "#9*90+password+04+4+4 + # " (04 defense zone, 24hrs
emergency alarm mode)
Coding Gas detector: "#9*90+password+05+5+4 + # " (05 defense zone, 24hrs emergency
alarm mode)
C. Delete all the remote controls
When main panel is in standby status, input "#9*91+password + # " on the wireless keypad,
main panel will BEEP when you press every key. Two BEEP indicate delete all the remote
controls ok.
D. Delete all the wireless sensors
When main panel is in standby status, input "#9*92+password + # " on the wireless keypad,
main panel will BEEP when you press every key. Two BEEPs indicate delete all the wireless
sensors ok.
E. Setting wireless siren ID:
When main panel is in standby status, input "#9*93+8 digits ID Code + # " on the wireless
keypad, Two BEEP indicate setting successfully.
E.g. Wireless siren ID code: 12100000, input #9*9312100000#.
If you would like to delete wireless siren, please set the ID as 00000000: #9*93 00000000#
4. Siren's hooting time setting
When main panel is in standby status, input "#9*52+(00 ～ 30 ) # " on the wireless keypad,
main panel will BEEP when you press every key. Two BEEP indicate siren's hooting time
setting ok.
Note: 00～30 is the siren's hooting time(Unit:minutes)
1) if you set siren's hooting time over 30m, the siren won't stop hooting until you disarm the
system;
2) if you set siren's hooting time is 00, the siren will be mute alarm;
5. Siren accompany sound ON/OFF setting
17
Advertisement
