Advertisement
If the device is lying installed and you want to get correct image and video, you should input
"#9*60#" on the wireless keypad when main panel is in standby status.
If the device is hung installed and you want to get correct image and video, you should input
"#9*61#" on the wireless keypad when main panel is in standby status.
12. 3G network searching
The 3G system default set 3G automatically, if the 3G signal is weak, the 3G system will
switch to 2G network automatically. As you know, if using 2G network, it can call out video
call. At this moment, users can choose 3G Only, you can operate on keypad like this: "＃ 9*13
＃ ", the main host will sound "BB" to indicate operation successfully.
(Please note: If choosing 3G Only, if there is no 3G signal, the main host won't switch to 2G
network.)
If setting 3G automatically(When there is no 3G signal, it will switch to 2G signal), operate like
this: "＃ 9*12 ＃ ", the main host will sound "BB" to indicate operation successfully.
13. Setting AC power failure alarm function
It is set to be ON by default setting. When AC power off or external power stop, the main host
will alarm immediately.
Close this function: operate on wireless keypad like this: "＃ 9* 40 ＃ ", the main host will sound
"BB" to indicate operation successful.
Start this function: operate on wireless keypad like this: "＃ 9* 41 ＃ " , the main host will sound
"BB" to indicate operation successful.
14. Start Record when arm function
This function is closed from default setting. When press button " " on remote controller, the
3G main host will record to TF Flash card, when press " " on remote controller, the 3G main
host stop recording.
Start this function: Input " ＃ 9* 81 ＃ " on keypad, the main host will sound "BB' to indicate
operation successful.
Close this function: Input " ＃ 9* 80 ＃ " on keypad, the main host will sound "BB' to indicate
operation successful.
15. Come back to factory default setting
When main panel is in standby status, input "#9*69+password+#" on the wireless keypad,
main panel will BEEP when you press every key. Two BEEP indicate new password changing
ok.
Note: When the system come back to factory default setting, all the functions will be:
1) Siren accompany sound: ON
2) Alarm calling quantity is: 15
3) Time delay to arm is:0s
4) Time delay to alarm is:0s
5) Alarm phone numbers,SMS numbers and MMS number is blank
6) Arm/disarm SMS remind function is: OFF
19
Advertisement
