Advertisement
When main panel is in standby status, input "#9* 2 (1/0) # " on the wireless keypad, main panel
will BEEP when you press every key. Two BEEP indicate this function setting ok.
Note: 1) #9* 2 1 # Turn ON the Remote control opration audio
2) #9* 2 0 # Turn OFF the Remote control opration audio
3) Then when you press any key on the remote control, the mini siren will sound at the
same time.
6. Password changing setting
When main panel is in standby status, input "#7*new password+new password+#" on the
wireless keypad, main panel will BEEP when you press every key. Two BEEP indicate new
password changing ok.
For example, if you want to change the original password 1234 into 5678, you can input
"#7*56785678#"
7. Time delay to Arm function setting
When main panel is in standby status, input "#9*50+(01 ～ 99 ) # " on the wireless keypad,
main panel will BEEP when you press every key. Two BEEP indicate time delay to arm
setting ok.
Note: 01～99 is the arm delay time(Unit:seconds)
8. Time delay to Alarm function setting
When main panel is in standby status, input "#9*51+(01 ～ 99 ) # " on the wireless keypad,
main panel will BEEP when you press every key. Two BEEP indicate time delay to alarm
setting ok.
Note: 01～99 is the alarm delay time(Unit:seconds)
9. Remote control password protection function setting
To protect user's privacy or someone else operate the alarm system randomly, when you dial-
in, you should input the necessary right password. You only have 3 times to input password in
total, or the system will hang up.
When main panel is in standby status, input "#9*31 #" on the wireless keypad to turn on the
password protection function; input "#9*30 #" to turn off this function.
10. Image and video TF card storage function when alarming
Turn ON/OFF Image and video TF card storage function:
When main panel is in standby status, input "#9*15#" on the wireless keypad, main panel will
BEEP when you press every key. Two BEEP indicate TF card storage function is ON. When
system alarms, images and videos will be stored into TF card.(TF card format: FAT)
If you choose to turn on this function, it will take 3 photos and record for 5s to TF flash card
when alarm happens.
If you want to turn OFF this function, you can input "#9*14#" on the wireless keypad when
main panel is in standby status. Default setting: function OFF
11. Device installation and image & video direction setting
18
Advertisement
