Advertisement
C. Alarm SMS number setting
This system support 3 SMS alarm phone numbers.
When main panel is in standby status, input "#0*0(1 ～ 6 )*phone number# " on the wireless
keypad, main panel will BEEP when you press every key. Two BEEP indicate alarm SMS
number setting ok.(1～6 means No.1 to No.6 alarm SMS number.)
For example, if your phone number is 13800138000 and you want to set it to be the NO.1
alarm D
number, you can input "#0*01+13800138000#"
D. Alarm MMS number setting
This system support 3 MMS alarm phone numbers. When main panel is in standby status,
input "# 0 * (11-13) phone number
3
rd
group. When you input "11" stand for 1
group. E.g #0*1110010# for setting 1
E. How to delete alarm phone numbers
Whether you want to delete alarm audio talking phone number or video talking number, Input
"#(1~ 6 )*# " on keypad, "1~6" stands for 1
group, 2 means 2
nd
group,etc. E.g if you input "#1*#": Deleting 1
F. How to delete SMS phone numbers
Input " # 0 * ( 01 ~ 03 ) # " on keypad, "01~03" stands for 1
number, 01 means 1
st
group SMS phone number.
G. How to delete MMS phone numbers
Input "# 0 *(11~13)#" on keypad, "11~13" stands for 1
number, 11 means 1
st
group MMS phone number.
H. Arm/Disarm short message(SMS) feedback function ON/OFF setting
When main panel is in standby status, input "#9*11#" on the wireless keypad, main panel will
BEEP when you press every key. Two BEEP indicate Arm/Disarm short message(SMS)
feedback function is ON.
If you want to turn OFF this function, you can input "#9*10#"
3. Coding wireless remote controls/sensors
A. Coding wireless remote controls
When main panel is in standby status(Arm or Disarm status), input "#9*90+password+#" on
the wireless keypad, main panel will BEEP when you press every key. Please trigger the
remote control quickly after you input the command. Two BEEP indicate coding ok.
B. Coding wireless sensors
When main panel is in standby status(Arm or Disarm status), input "#9*90+password+zone
number+sensor code+sensor alarm mode code+ # " on the wireless keypad, main panel
will BEEP when you press every key. Please trigger the sensor quickly after you input the
command. Two BEEP indicate coding ok.
NOTE:
# " on the wireless keypad, "11-13" stands for 1
st
st
group MMS phone number.
st
group, 02 means 2
nd
group, 12 means 2
nd
group, "12" stand for 2
group to 6
th
group phone number,1 means 1
st
st
group to 3
group,etc. E.g if you input "#0*01#": Deleting 1
st
group to 3
group,etc. E.g if you input "#0*11#": Deleting 1
st
group to
nd
group."13" stand for 3
group phone number.
rd
group SMS phone
rd
group MMS phone
rd
st
st
st
16
Advertisement
