Power On; Setting The Language; Printout The Status Page - Kyocera ECOSYS P3060dn Service Manual

Power on

8. Press the power switch and then check
the lighting up of ready indicator.
9. Installing the printer driver (refer to
operation guide).

Setting the language

1. Press the menu key.
2. Select [Device Common] using the cursor up/down keys.
3. Press the OK key.
4. Select [Language] using the cursor up/down keys.
5. Press the OK key.
6. Select the language to set using the cursor up/down keys.
7. Press the OK key.

Printout the status page

1. Press the menu key.
2. Select [Report Print] using the cursor up/down keys.
3. Press the OK key.
4. Select [Status Page] using the cursor up/down keys.
5. Press the OK key.
6. Select the [YES] using the left select key.
7. [Accepted] is displayed and the page will be printed.
8. Press the menu key.
Completion of the machine installation
ON
Power switch
Figure 1-2-20
1-2-11
2T6/2T7/2T8/2T9
Ready indicator
ON