Sharp XV-Z201E Operation Manual page 9

Operati
Projector (
Available Range of the Remote Control
The remote control can be used to control the projector
within the ranges shown in the illustration.
Note
• The signal from the remote control can be reflected off a screen
ck Guide
for easy operation. However, the effective distance of the signal
ontents
may differ due to the screen material.
o not defeat the
When using the remote control:
age, connection of the projector and the video equipment is explained as an example
• Be sure not to drop, or expose to moisture or high temperature.
. Three-wire grou
procedure from setup to projection. Refer to each page for details.
• The remote control may malfunction under a fluorescent lamp.
troduction
grounding term
Under that circumstance, move the projector away from the fluo-
ntake ventilative hole 62
red equipments
rescent lamp.
Projector Remote control
• Insert the batteries.
(Page 11)
Inserting the Batteries
The batteries (two "AA" size) are included in
t Names ............
the package.
d this operation manual carefully.
1
Pull down the tab on the cover
and remove the cover towards
the projector facing a wall or a screen.
the direction of the arrow.
INPUT 2/DIGITAL INPUT
ect to video equipment. (Page 16)
2
Insert the included batteries.
loss or theft of your
• Insert the batteries making sure the
umber located on
polarities correctly match the
in this information.
marks inside the battery compart-
ease be sure that
ment.
e carton thoroughly
ories" on page 12.
3
Insert the lower tab of the
cover into the opening, and
Do not look into the beam or view it directly. Be especially careful that children
nto the beam.
lower the cover until it clicks
............................... 24
in place.
....................................... 24
sk of fire or electric shock, do not expose this product to
d ..................................... 24
e.
d ..................................... 25
....................................... 25
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
....................................... 25
electric shock, do not remove cabinet. No user-serviceable parts are inside.
Caution
istance .......................... 26
alified service personnel.
• Insert the batteries making sure the polarities correctly match the
Using the Terminal Cover
...................................... 28
Video cable
ment.
When the projector is used on a desktop, high mounted or ceiling mounted, attach the terminal cover (supplied)
• Batteries of different types have different properties, therefore do not mix batteries of different types.
to hide the connecting cables.
• Do not mix new and old batteries.
inues to run for about 90 seconds after the projector enters the standby mode.
............................... 30
Attaching the Terminal
This may shorten the life of new batteries or may cause old batteries to leak.
ng the projector into the standby mode always use the STANDBY button on the
...................................... 30
Cover • Remove the batteries from the remote control once they have run out, as leaving them can cause them to leak.
nsure the cooling fan has stopped before disconnecting the power cord.
ect the output terminal of the video equip- Align with the tabs on
isplay Language ........... 31
ER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD.
Battery fluid from leaked batteries is harmful to your skin, therefore be sure to first wipe them and then remove
the projector and
ESULT IN PREMATURE LAMP FAILURE.
....................................... 32 to the input terminal of the audio equip-
them using a cloth.
then press the
using an audio cable.
....................................... 33
terminal cover in the • The batteries included with this projector may exhaust over a short period, depending on how they are kept.
d Image
he power cord into the AC socket of the
direction of the arrow.
Be sure to replace them as soon as possible with new batteries when they have run out.
rection ............................ 34
domestic environment this product may cause radio interference in
ctor and into the wall outlet. (Page 14) Tighten the two
• Remove the batteries from the remote control if you will not be using the remote control for a long time.
..................................... 35
uired to take adequate measures.
screws on the bottom
ect Ratio .......................... 35
ve the lens cap from the lens.
of the projector.
Downloaded From projector-manual.com Sharp Manuals
d Settings
ens cap
Remote control sensor
Power cord
Using the "Options" Menu ............................... 51
Checking the Lamp Life Status .............................. 51
Turning on/off the On-screen Display ...................... 51
Selecting the Signal Type ....................................... 52
Setting the Video Signal (VIDEO menu only) ........... 52
6. Turn the projector on using
Selecting a Background Image .............................. 53
18
Setting the Eco Mode .............................................. 53
terminal
Automatic Power Shut-off Function ........................ 54
Selecting the Menu Screen Position ........................ 54
Model No.: XV-Z201E
Selecting the Menu Colour ..................................... 55
Reversing/Inverting Projected Images ............ 56
Serial No.:
Appendix
Maintenance Indicators .................................... 58
Regarding the Lamp ......................................... 59
Lamp ...................................................................... 59
14
AC socket
Caution Concerning the Lamp ................................ 59
INPUT 1 COMPONENT
Replacing the Lamp ................................................ 59
terminals (RCA) 7. Press
Removing and Installing the Lamp Unit ................. 60
INPUT 4 VIDEO terminal (RCA)
Resetting the Lamp Timer ....................................... 61
Cleaning the Ventilative Holes ......................... 62
Using the Kensington Lock .............................. 63
Troubleshooting ................................................ 63
To INPUT 4
Connecting Pin Assignments .......................... 64
8. Turn on the video equipment.
terminal
(RS-232C) Specifications
and Command Settings .............................. 65
To video out
Computer Compatibility Chart ......................... 66
put terminal
Specifications .................................................... 67
Dimensions ........................................................ 68
9. Play the video.
Glossary ............................................................. 69
Index ................................................................... 70
10.Adjust the image size, image position and the
Adjust the zooming by
moving the zoom knob.
11
ENGLISH
15
INPUT 3 S-VIDEO terminal
control. (Page 30)
(4-pin Mini DIN)
ON button
INPUT 4 button
and
17
on the remote control to select the
INPUT 4 mode. (Page 31)
"On-screen Display
Removing the Terminal
Cover
Loosen the two screws
on the bottom of the
projector.
Raise the terminal cover
focus. (Page 25)
and pull it out in the
direction of the arrow.
45˚
62
Intake ventilative hole
30˚
Remote control
Video equipment
Video cable
on the remote
23
RS-232C terminal
(9-pin D-sub)
The power indicator
illuminates green.
16 20
DIGITAL INPUT
TYPE switch
and marks inside the battery compart-
ON
Adjust the height of the image
by rotating the lens shift dial.
Remote control
7 m
30˚
30˚
45˚
-1