Sharp XV-Z201E Operation Manual page 22

Connecting the Projector to Other Devices
Connecting to Video
Equipment with the DVI
Output Terminal Using
a DVI Cable (DIGITAL
INPUT)
Use the DVI cable when connecting video
equipment with the DVI output terminal such
as DVD players and DTV decoders to DIGITAL
INPUT terminal.
1
Slide the "DIGITAL INPUT
TYPE" switch on the back ter-
minal board to "VIDEO".
2
Connect the DVI cable to the
DIGITAL INPUT terminal.
3
Connect the other end to the
corresponding terminal on the
DVD player or DTV decoder.
• Secure the connectors by tightening the
thumbscrews.
Note
• Select DIGITAL INPUT mode when con-
necting to video equipment with the digi-
tal output terminal. (See page 31.)
• Make sure to turn both the projector and
the video equipment off before switching
the "DIGITAL INPUT TYPE" switch and
connecting.
Downloaded From projector-manual.com Sharp Manuals
-20
Optional
accessory
To DIGITAL INPUT
terminal
DVD player or
DTV decoder
DVI cable
Type: AN-C3DV
(3.0 m)
DIGITAL INPUT
TYPE switch
DVI cable
(sold separately)
To DVI digital output terminal