Sharp XV-Z201E Operation Manual page 50

Using the "Options " Menu
Adjusting the Computer and DVD/DTV Images
Automatic Power Shut-
off Function
When no input signal is detected for more than
Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in
15 minutes, the projector will automatically en-
portions of the screen.
ter the standby mode if set to
Select "Auto Power Off " in the "Options "
menu on the menu screen.
• For operating the menu screen, see
pages 38 to 41.
When Auto Sync is OFF
Selected Item
When "Auto Sync" is "OFF", interference such
Projector automatically enters the
as flickering or vertical stripes may occur if
standby mode after 15 minutes
displaying tilings or vertical stripes. Should
without an input signal.
this occur, adjust "Clock", "Phase", "H-Pos"
Automatic Power Shut-off disabled.
and "V-Pos" for obtaining an optimum image.
Select "Clock", "Phase", "H-Pos" or "V-
Pos" in the "Fine Sync" menu on the
Note
menu screen.
• " Auto Power Off " is factory preset to "
➝For operating the menu screen, see
• When the Auto Power Off function is set to
" (ON)", 5 minutes before the projector
pages 38 to 41.
enters the standby mode, the message "En-
ter STANDBY mode in X min. " will appear on
Selected Item
the screen to indicate the remaining minutes.
Clock
Phase
H-Pos
V-Pos
Selecting the Menu
Note
Screen Position
• "Clock", "Phase", "H-Pos" and "V-Pos" can-
This function allows you to select the desired
not be used in the DIGITAL INPUT mode.
• "Clock" and "Phase" cannot be used in the
position of the menu screen.
Component mode.
Select "Menu Position " in the "Options "
• Computer image adjustments can be
menu on the menu screen.
made easily by pressing
• For operating the menu screen, see
mote control. See page 50 for details.
pages 38 to 41.
• To reset all adjustment items, select "Re-
set" on the "Fine Sync" menu screen and
Selected Item
press .
• The adjustable area of each item may be Center The menu is displayed on the
center of the image.
changed according to the input signal.
Upper The menu is displayed on the
Right upper right of the image.
Lower The menu is displayed on the
Right lower right of the image.
Upper The menu is displayed on the
Left upper left of the image.
Lower The menu is displayed on the
Left lower left of the image.
Downloaded From projector-manual.com Sharp Manuals
-54 -54
" " (ON).
Description
".
Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centres the on-screen image by moving it to the left or right.
Centres the on-screen image by moving it up or down.
AUTO SYNC
on the re-
Description
On-screen Display
On-screen Display
Description
On-screen Display