Rgb/Comp. Button - Sharp XV-Z201E Operation Manual
Hide thumbs
Also See for XV-Z201E:
- Operation manual (73 pages) ,
- Service manual (140 pages) ,
- Service manual (140 pages)
Table of Contents
Advertisement
Using the “Options” Menu
Selecting the Signal
Type
This function allows you to select the input
signal type Component or RGB for INPUT 2.
Select “Signal Type” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Description
Selected Item
RGB
Set when RGB signals are
received.
Set when Component signals
Component
are received.
Note
• “RGB” or “Component” can be selected
with
on the remote control only in
INPUT 2.
Setting the Video Signal
(VIDEO menu only)
The video input system mode is preset to
“Auto”; however, it can be changed to a spe-
cific system mode if the selected system mode
is not compatible with the connected audiovi-
sual equipment.
Select “Video System” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
• When the system mode is set to “Auto”,
you may not receive a clear picture due
to signal differences. Should this occur,
switch to the video system of the source
signal.
• “Auto” cannot be set for PAL-M and PAL-
N input signals. Select “PAL-M” or “PAL-
N” in “Video System” menu for PAL-M and
PAL-N input signals.
Downloaded From projector-manual.com Sharp Manuals
-52
-52
On-screen Display
RGB/COMP. button
On-screen Display
Advertisement
Table of Contents
