Standby Button - Sharp XV-Z201E Operation Manual
Hide thumbs
Also See for XV-Z201E:
- Operation manual (73 pages) ,
- Service manual (140 pages) ,
- Service manual (140 pages)
Table of Contents
Advertisement
Image Projection
Turning the Power off
1
Press
on the remote con-
trol or
on the projector,
then press
or
again
while the confirmation message
is displayed, to put the projec-
tor into the standby mode.
• A dimly-lit screen is displayed for a
short time to reduce lamp damage.
Note
• If you accidentally pressed
and do not want to put the projector
into the standby mode, wait until the
confirmation message disappears.
2
Unplug the power cord from the
AC outlet after the cooling fan
stops.
Info
• Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
• When connected to equipment such
as an amplifier, be sure to turn off
the power to the equipment con-
nected first and then to the projec-
tor.
Downloaded From projector-manual.com Sharp Manuals
-32
-32
STANDBY button
STANDBY button
Advertisement
Table of Contents
