Table of Contents
Advertisement
Connectors and Cables
Table 1-2 MVME761 Transition Module Connectors (continued)
Type
Parallel port
10Base-T,
100Base-TX
SIM
VME
Table 1-3 3-Row P2 Adapter Connectors (MVME761-001)
Type
VME
SCSI
Table 1-4 5-Row P2 Adapter Connectors (MVME761-011)
Type
VME
PMC I/O
SCSI
Table 1-5 Transition Module Cables
Part Number
Included with the
MVME761-0x1
User-supplied
User-supplied
User-supplied
User-supplied
CBL761HD26DB25
If you supply your own 64-line cable to connect the P2 adapter to the MVME761 transition module, the
cable should not be longer than 1.5 feet. A longer cable is likely to cause problems, especially for the
Ethernet and parallel port signals.
MVME7616E Transition Module Installation and Use (6806800A43B)
Number
J4
J9
J1, J12
P2
Number
Description
P1
96-pin female DIN 41612 connector to the chassis backplane
J3
64-pin male connector for output to P2 on the MVME761 transition module
J2
50-pin male IDC connector for internal SCSI devices
Number
Description
P1
160-pin female DIN 41612 connector to the chassis backplane
J4
64-pin male connector for output to P2 on the MVME761 transition
module
J3
64-pin male connector for PMC I/O
J1
68-pin female IDC connector for internal SCSI devices
Description
64-line flat ribbon cable with 96-pin DIN connectors that connects P2 on
the MVME761transition module to J3 on the 3-row P2 Adapter or J4 on
the 5-row P2 adapter; 13 inches long. (30-W2799B02A).
EIA-232-D DTE or DCE cable (pins used depend on the processor
VMEmodule)
Centronics- type parallel printer cable, male-to-male
20-conductor cable; usually supplied with the modem
6-conductor cable; usually supplied with the modem
Straight-through adapter cable with male HD-26 connector and female
DB-25 connector, 3 feet long. (30-NW9302B27)
Description
36-pin female parallel port connector
8-pin female RJ-45 Ethernet port connector
60-pin female connector
64-pin male connector to J2 on the P2 adapter
General Information
17
Advertisement
Table of Contents
