P2 Signal Multiplexing (P2MX)
Figure 3-3
16-bit Single-ended SCSI
Terminators
3.3
P2 Signal Multiplexing (P2MX)
Because of a limited number of pins on the P2 connector, both the VME processor board and
the MVME761 transition module multiplex and demultiplex some of the P2 signals. This
function, called P2MX is transparent to the software and the user.
Four pins are used for the signal multiplexing:
MXCLK
MXSYNC#
MXDO
MXDI
MVME7616E Transition Module Installation and Use (6806800A43B)
5-Row DIN Backplane P2 Adapter Block Diagram
SCSI
5-Row Backplane Connector
64-pin Connector to MVME761 Transition Module
PMC I/O
Functional Description
11752.00 9703
27