Display Messages - SafeCom SWSIP-1000 User Manual

WLAN SIP IP Phone
6

Display Messages

a. Error Messages
Error messages are displayed to let you know that an error has occurred. These error
messages may prevent you from connecting to the network or from using the phone.
You may need to contact the system administrator to resolve the problem.
12:00
SWSIP-1000
Not Registered
Menu Names
12:00
SWSIP-1000
Net Fail! (DHCP)
Menu Names
12:00
SWSIP-1000
Net Fail! (PPPoE)
Menu Names
12:00
SWSIP-1000
Not Registered
Menu Names
Copyright © 2006 Safecom Technologies Limited
Error 1: No AP found ( blinking)
The ESSID set on the phone does not match any of the
Service Set Identifiers (SSIDs) of the AP in the network.
Error 2: Net Fail! (DHCP)
The phone failed to obtain the IP address from the DHCP
server, or failed to authenticate due to a Wep Key error.
Error 3: Net Fail! (PPPoE)
The phone failed to obtain the IP address from your ISP
service.
Error 4: Registering to SIP proxy failed
The phone failed to register with the SIP Proxy.
It could be due to the WEP key or SIP proxy setting error.
Please contact your service provider, or check your
Settings.
www.safecom.cn
SWSIP-1000 User Manual
SIP
53