Lcd Main Screen - SafeCom SWSIP-1000 User Manual

WLAN SIP IP Phone

3 LCD Main Screen

Press the Power/End key for two seconds to turn on the SWSIP-1000. The SWSIP-1000 searches
for the available wireless network with the best signal. It then restarts and attempts to connect to
the wireless network.
This is the main screen.
Figure 3.1 LCD Main Screen
Table 2 LCD Main Screen
LABEL DESCRIPTION
This icon shows the strength of the wireless LAN signal.
10:00 The time displays in the top center.
This icon shows the battery's current charge.
This field is a banner that you can configure.
SWSIP-1000
This the SWSIP-1000's current connection status. Not registered displays
when the SWSIP-1000 can access the wireless network and the Internet but
has not registered with the SIP proxy server.
Not Registered
Registered displays after the menu settings are properly configured and the
.
SWSIP-1000 connects to the SIP proxy server (the settings may have
already been configured for you).
If any other message displays the SWSIP-1000 may not be able to access
the wireless network or the Internet
This is the function of the Left key. Press the Left key from the main screen
Menu
to open the menus.
This is the function of the Right key. Press the Right key from the main
Names
screen to open the phonebook.
Copyright © 2006 Safecom Technologies Limited
www.safecom.cn
SWSIP-1000 User Manual
10