Sip Configuration - SafeCom SWSIP-1000 User Manual

WLAN SIP IP Phone

4.4 SIP Configuration

Your SWSIP-1000 is a SIP client and must connect to a SIP server. The SIP proxy server receives
your SWSIP-1000's SIP requests and forwards them to the next SIP server in the network.
Use the following screen to set up your SWSIP-1000 to connect to the SIP server.
You can obtain the User name and Password from the VOIP ISP.We have tested the SWSIP-1000
SIP Phone with many of the VoIP ISP's ,here is an example of voiptalk.org, you can obtained
your User name and Password from http://www.voiptalk.org .
(1) Let's assume that you have obtained the following information from your SIP ISP:
Account: 84424833
Password: secret
Domain server : voiptalk.org
Proxy Server: nat.voiptalk.org :5065
Outbound Proxy Server: nat.voiptalk.org :5065
Note: Enter either the IP address of your SIP server or the URL domain name as given to you by
your ITSP.
Figure 4.4 SIP Configuration
Copyright © 2006 Safecom Technologies Limited
.
www.safecom.cn
SWSIP-1000 User Manual
42