Channel; Rate - SafeCom SWSIP-1000 User Manual

WLAN SIP IP Phone
SWSIP-1000 User Manual

3.5.3 Channel

A radio frequency used by a wireless device is called a channel. The SWSIP-1000 determines
which channel to use when you do the site survey and select the AP. Do the following to
display the channel that the SWSIP-1000 is using.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
7. Wireless
2 Select Channel.
3 The SWSIP-1000 displays the channel that it is currently using.

3.5.4 Rate

Do the following to set the transfer rate of the SWSIP-1000's wireless
connection to the AP.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
2 Select Rate.
3 Select Auto to have the SWSIP-1000 automatically use the highest
rate that the wireless connection to the AP will support.
Select another rate to have the SWSIP-1000 connect to the AP at
only that rate.
17
www.safecom.cn
Copyright © 2006 Safecom Technologies Limited