SafeCom SWSIP-1000 User Manual page 47

WLAN SIP IP Phone
LABEL
Registrar Server Address
Registrar Server Port
Register Expiry Time
(sec.)
OPTIONS Interval Timer
Session Expiry Time (sec.)
SIP Service Domain
Registrar Username
Registrar Password
Registration Status
APPLY
CANCEL
Copyright © 2006 Safecom Technologies Limited
DESCRIPTION
Enter the SIP register server's IP address or domain name in this field.
You can use up to 95 ASCII characters.
If you were not given a registered server address, then enter the
address from the SIP Server Address field again here.
Enter the SIP register server's listening port for SIP in this field.
If you were not given a register server port, then enter the port
from the SIP Server Port field again here.
This field sets how long an entry remains registered with the SIP
register server. After this time period expires, the SIP register server
deletes the SWSIP-1000's entry from the database of registered SIP
numbers. The register server can use a different time period. The
SWSIP-1000 sends another registration request after half of this configured
time period has expired.
The OPTIONS Interval Timer periodically sends a signal to the SIP
Proxy Server to maintain the connection.
Type a time in minutes to send a KeepAlive signal to the SIP Proxy
Server. The default is 0, which disables this feature.
Use this field to set the longest time that the SWSIP-1000 will allow a SIP
session to remain idle (without traffic) before dropping it.
Enter the SIP service domain name in this field (the domain name that
comes after the @ symbol in a full SIP URI). You can use up to 127
ASCII Extended set characters.
Type in the username as supplied by your VoIP provider to access the
SIP-Server.
Type in the password to associate with the username above.
This displays either Registered or Not Registered depending on the
success of your SWSIP-1000's connection to the SIP-Server.
Click APPLY to save your changes without restarting the SWSIP-1000. Your
wireless LAN, Internet and SIP settings changes do not take affect until
you use RESTART (in the navigation panel).
Click CANCEL to begin configuring this screen afresh.
www.safecom.cn
SWSIP-1000 User Manual
43