Site Survey; Ssid - SafeCom SWSIP-1000 User Manual

WLAN SIP IP Phone
SWSIP-1000 User Manual

3.5.1.1 Site Survey

Do the following to browse the APs available in your area and select one.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
2 Select Site Survey.
3 The SWSIP-1000 checks for and displays a list of available APs.
4 An AP's SSID is followed by a number describing its relative
signal strength. The higher the number, the better the signal. A
"W" next to an AP's name means that the AP uses WEP
encryption Select an AP to use.

3.5.1.2 SSID

(Service Set ID) The SSID identifies the Service Set with which a wireless station is
associated. Wireless stations associating to the access point (AP) must have the same SSID.
You can think of the SSID as being similar to a workgroup name in a Microsoft network. Do
the following to display the SSID that the SWSIP-1000 is using.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
7. Wireless
2 Select SSID.
3 The SWSIP-1000 displays the channel that it is currently using.
15
www.safecom.cn
Copyright © 2006 Safecom Technologies Limited