Table of Contents
Advertisement
User's Guide
Important:
c
Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing.
5. Shake the ink cartridge horizontally for 5 seconds, moving it back and forth about 10 cm 15 times.
6. Insert the cartridge into the printer until it clicks.
Note:
If Cartridge Check is displayed on the control panel, press the OK button to check if the cartridges are installed
correctly.
7. Close the front cover.
Related Information
"Ink Cartridge Codes" on page 65
&
"Ink Cartridge Handling Precautions" on page 65
&
Maintenance Box Code
Epson recommends the use of a genuine Epson maintenance box.
The following is the code for the genuine Epson maintenance box.
T6712
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
❏ Do not remove the film on the top of the box; otherwise ink may leak.
❏ Do not tilt the used maintenance box until after it is sealed in the plastic bag; otherwise ink may leak.
Replacing Ink Cartridges and Other Consumables
68
Advertisement
Table of Contents
