The Handy THS80 Instruction Manual page 8

STEP 3

Insert the Inner Axle Bushing into the Outer Axle Bushing and make sure they are tight.

Install the right Wheel Assembly onto the right Axle, using M5x45 Bolt & M5 Lock Nut and install
the End Cap onto the right Axle, using a wooden or rubber mallet.

Install the left Wheel Assembly onto the left Axle, put a Flat Washer Ø16 and install the Cap onto
the left Axle using a wooden or rubber mallet.
Ensure the outer &
inner bushes are
located correctly.