Sound Adjustment; Adjusting The Sound - Sony MHC-GN100D Operating Instructions Manual

Notes
• When you press REC PAUSE/START, the sound
field is changed to LINK if the current sound field is
SBS MULTI, A.F.D. AUTO, PRO LOGIC, PLII
MOVIE or PLII MUSIC.
• When you press REC PAUSE/START, the sound
field is changed to HP 2CH if the current sound field
is HP VIRTUAL.
• You cannot listen to other sources while recording.
Tips
• For recording from the reverse side:
After step 1 of "Recording on a tape manually", press
TAPE A/B repeatedly until "TAPE B" appears in the
display. Press nN repeatedly until TAPE B
reverse side indicator lights up to start playback of
the reverse side. Press x at the point you want to start
recording.
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
• For recording from a disc to a tape manually:
You can turn +. >– clockwise or
counterclockwise (or press
on the remote) to select tracks during recording pause
mode (after step 4 and before step 6 of "Recording on
a tape manually").
• You can mix the sound from the component
connected to the GAME INPUT jacks with another
function. To record the mixed sound, press GAME
MIXING after step 4 and before step 6 of "Recording
on a tape manually".
• For recording an album of MP3 audio tracks:
Press PLAY MODE repeatedly until "ALBM" lights
up in the display and then turn ALBUM +/–
clockwise or counterclockwise repeatedly (or press
ALBUM +/– on the remote repeatedly) to select the
album you want (after step 4 and before step 6 of
"Recording on a tape manually").
• For recording from the tape:
If you set the direction to "j" (or "RELAY")
when the tapes you use have different lengths, the
tape in each deck reverses independently.
. >
or repeatedly

Sound Adjustment

Adjusting the sound

You can reinforce the bass and create a more
powerful sound.
The GROOVE setting is ideal for music sources,
and the V-GROOVE setting is ideal for video
sources (movie, etc.).
Press GROOVE on the unit repeatedly.
Each time you press the button, the display
changes cyclically as follows:
GROOVE ON* t V-GROOVE ON* t
GROOVE OFF
* The volume switches to power mode and the
equalizer curve changes.
Tips
• The default setting is "GROOVE ON".
• "GROOVE" lights up in the display if "GROOVE
ON" is selected.
• "V-GROOVE" lights up in the display if
"V-GROOVE ON" is selected.
49 GB