Setting The Clock; Performing Quick Setup - Sony MHC-GN100D Operating Instructions Manual

Setting the clock

1
Press ?/1 to turn on the system.
2
Press CLOCK/TIMER SET.
"CLOCK" appears in the display. Then the
hour indication flashes in the display.
3
Press M or m repeatedly to set the hour.
4
Press ENTER.
The minute indication flashes in the
display.
5
Press M or m repeatedly to set the
minute.
6
Press ENTER.
The clock starts functioning.
To adjust the clock
1
Press CLOCK/TIMER SET.
"SET" appears in the display. Then
"PLAY SET?" flashes in the display.
2
Press M or m repeatedly to select "CLOCK
SET?", then press ENTER.
The hour indication flashes in the display.
3
Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in power saving mode
(page 60).

Performing QUICK SETUP

You can set the initial settings of LANGUAGE
SETUP, ROOM SIZE, LISTENING
POSITION and TV TYPE step by step in
QUICK SETUP. After performing the QUICK
SETUP, the system is ready for playing back of
movies, music CDs, etc. To perform further
speakers settings, see "Speaker settings" on
page 38.
1
Turn on your TV and select the video
input.
2
Press ?/1 to turn on the unit.
3
Press FUNCTION +/– repeatedly until
"DVD" appears in the front panel
display (or press DVD on the unit).
The guide message appears at the bottom of
the on-screen display.
4
Press ENTER.
The "LANGUAGE SETUP" display
appears in the on-screen display.
LANGUAGE SETUP
ENGLISH
CHINESE1
CHINESE2
OTHERS
When "OTHERSt" appears, you can
select "OTHERSt" to select the language
from the language code list using the
numeric buttons (page 83). The selected
language code (4-digit number) is displayed
the next time you select "OTHERSt".
The language you select in "LANGUAGE
SETUP" is for "OSD", "DVD MENU" and
"SUBTITLE". However, if you select
"OTHERSt", the setting is for
"SUBTITLE" and "DVD MENU" only.
13 GB