Messages - Sony MHC-GN100D Operating Instructions Manual

Table of Contents

Advertisement

If the system still does not
operate properly after performing
the above measures or other
troubles does not described
above occur, reset the system as
follows:
Use buttons on the unit for the operation.
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press ?/1 to turn on the unit.
4
Press x, ENTER and ?/1 at the same time.
The system is reset to the factory settings except
for DVD settings. You should set the settings
you made, such as the preset stations, clock and
timer.
To return the DVD setup to the
default settings*, perform reset
as follows:
1
Press DVD SETUP when playback is
stopped.
The Setup Menu appears on the on-screen
display.
2
Press M or m repeatedly to select
"SETUP", then press ENTER.
3
Press M or m repeatedly to select
"RESET", then press ENTER.
4
Press M or m repeatedly to select
"YES", then press ENTER
It takes a few seconds to complete. Do not
press ?/1 when resetting the system.
* Except for Parental Control settings
Note
If you have connected an optional subwoofer, turn off
the sub woofer before you reset the system.
GB
76

Messages

One of the following messages may appear or
flash in the front panel display during operation.
DVD/VIDEO CD/CD/MP3/JPEG
Cannot Play
• A disc that cannot be played back was inserted.
• A disc with unsupported region code was inserted.
No Disc
There is no disc on the disc tray.
NO STEP
You have cleared all the steps you programmed.
Push STOP!
You have pressed PLAY MODE, DVD SETUP or
CD SYNC during playback.
Step Full!
You tried to program more than 25 steps.
Reading
The system is reading information of the disc. Some
buttons are not available.
Please Wait
The system is doing initialization process.
Play Limit
You tried to playback an MP3 audio track whose
format is not supported by this system.
Data Error
You tried to playback a JPEG image file whose
format is not supported by this system.
Tape
No Tab
You cannot record the tape because the tab has been
removed from the tape.
No Tape
There is no tape in the tape deck.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhc-gn90d

Table of Contents