Troubleshooting - Worx WG119E Safety And Operating Manual

TROUBLESHOOTING

WARNING: Switch the machine off and remove plug from power source before investigating any fault.
Problems Possible Causes
Trimmer fails to No power
operate. Power source socket faulty
Motor is broken.
Internal wiring of machine damaged.
Trimmer runs Motor is broken.
intermittently. On/Off switch defective.
Excessive Machine defective.
vibrations/ Line spool is not wound well.
noise.
Machine does Line broken.
not cut. Motor is broken (speed is too low).
Grass entangled around cutting head.
Auto feed does Cutting line is not wound well.
not work The line is tangled.
Line is used up.
2-in-1 Grass Trimmer/Edger WG1 19E
Corrective Action
Check power
Use another socket
Contact Service Agent.
Contact Service Agent.
Contact Service Agent.
Contact Service Agent.
Contact Service Agent.
Rewind the line. See "MANUALLY WINDING
THE LINE" (Fig. L, M, N, O).
Replace the line.
Contact Service Agent.
Remove grass.
Manually feed the line, if still cannot feed out,
remove the Spool out and rewind the line.
Replace with a new spool of line.
13