Troubleshooting - Worx WG216E.X Series Safety And Operating Manual

9. TROUBLESHOOTING

The following chart lists problem symptoms, possible causes and corrective action, if your electric hedge trimmer
does not operate properly. If these do not identify and correct the problem, contact your service agent.
WARNING! Always switch the product off, disconnect it from power supply and let the product cool down
before performing inspection, maintenance and cleaning work!
Problem
Hedge trimmer does not
operate
Hedge trimmer operates
intermittently
Motor runs but blades
remain stationary
Cutting blade hot
12
Possible Cause
1.1 No power
1.2 Mains socket faulty
1.3 Extension cord damaged
1.4 Fuse faulty
2.1 Extension cord damaged
2.2 Internal wiring damaged
2.3 On/Off switch defective
3. Internal fault
4.1 Cutting blade dull
4.2 Cutting blade has dents
4.3 Too much friction, due to
lack of lubricant
Electric Hedge Trimmer
WG216E WG216E.X
Solution
1.1 Check power
1.2 Check other socket, replace
1.3 Check cord, replace
1.4 Replace fuse
2.1 Check cord, replace
2.2 Contact Service Agent
2.3 Contact Service Agent
3. Contact Service Agent
4.1 Have blade sharpened
4.2 Have blade inspected/overhauled
4.3 Apply lubricant spray