Page 3
iColor® 600 Apparel Plus Tabloid Printer The iColor® 600 printer has been developed to produce high‐quality color prints with the added functionality of printing in white as a spot color or an overprint in one pass with the included iColor Transfer RIP Software. Please follow the enclosed quick setup guide to get started. The standard user manual (provided on CD enclosed) will provide detailed instructions for full printer functionality. The iColor® 600 comes complete with 4 toner cartridges for full color with white printing (CMYW), as well as a true black printing kit (toner and drum combination). Just quickly swap the white for black when true black is needed. With the white cartridge installed, black is produced using composite black (made from CMY). You will also have the option to add our full fluorescent kit which comes complete with 3 [CMY] toner cartridges and matching drum units. This system requires no additional software or expertise to print conventional CMYK images in vivid fluorescent color that glow under black (UV) light. Please note that vector and line art images, including text, are likely to produce the best results. For exciting design ideas and suggestions for using the iColor® 600 for maximum effect, please visit our website at www.iColorprint.com. 3 ...
Page 9
Installing iColor® 600 printer on a PC These instructions are for Windows 7 via USB cable, others are similar. You must have Administrator privileges on the computer. Do not turn it on or connect it to the computer 1. Unpack the printer according to the Set‐up Guide. until the install program asks you to do so. 2. Put the installation DVD into the drive and setup should automatically run. 3. Choose your language, select printer model (target device) C831, and choose the PS driver. After accepting the software agreement and going past the environmental advice pages, you can select software to install. Click the Next button. Also, near the bottom of this are the online manuals for later reference. 9 ...
Page 10
The installation will proceed, click Next after having the printer and cables as described. 6. Click Easy Installation (Local) then Next. Then you will see the dialog box below 10 ...
Page 11
7. Usually the next screen will show the installation progress, followed by the Finish screen. If not, click the Install using another port button and accept the USB default shown. Rename the Printer Navigate from the start menu to the list of installed printers. The Window 7 path is: 2. Right click on the printer C831(PS) and select the printer properties. On the General tab highlight the printer name and change it to ‘iColor 600’, then click OK 11 ...
Page 12
Use the included iColor® TransferRIP software to print a white overprint in one pass. Because the iColor 600 features white overprint capabilities, the cartridges are reordered to achieve this effect. Thus, the iColor TransferRIP software must be used in order to print. Otherwise, your colors will not print correctly. Please refer the the iColor TransferRIP Software User Manual for further information. The iColor® TransferRIP software allows the user to manipulate the white layer on top of your graphic for pressing on dark garments or when printing in halftones with less than 60% toner coverage. No need to create additional graphics with different color configurations – the software does it all – and in one pass! Enhance the brilliance of any graphic with fluorescent white overprint! Print and Transfer onto: Natural and synthetic fabrics Dark and light fabrics Beer, wine and juice bottles Label stock Leather Paper Stock Foils Create unique items ‐ The possibilities are endless! T‐shirts and sweatshirts Aprons Dark restaurant menus with fluorescent white print Corporate logo shirts Mouse pads ...
Page 13
It is highly recommended that you use the fluorescent cartridges with the black cartridge installed for best results. Fluorescent toners, by their nature, are very bright and cannot create accurate composite black. If white is needed anywhere on the image, it is suggested that you run the graphic through as a 2 pass to ensure accurate colors. Check your image to ensure there is no black in the image at all (No 100% K, or any composite black colors). The TransferRIP software will take any black color and automatically make a specific composite black color using the C, M, & Y colors which will produce undesirable results. Most fluorescent images will be placed on a black or dark colored garment, so black would not be suggested in these cases anyway. Use Geniune UniNet iColor Consumables Only use genuine UniNet iColor consumables. The use of incompatible supplies (toner, drums, transfer belts, fusers) will cause damage to your printer not covered by your warranty. Replacing toner and drum cartridges Because the iColor 600 features cartridge remapping to achieve a white overprint, it is important that you follow these rules when determining which color cartridge to order (pertains to both toner and drum units): Printer Display Reads: Replace with: Cyan low/out/empty White or Black (check which cartridge is installed)
Printing tips There are many variables that could produce different results. Specific steps may need to be altered based on: Type and brand of Heat Press: The temperature and duration varies slightly based on the heat press being used. All instructions are based on using a Hotronix Fusion press. Clam shell and swing away presses may also yield different results. Type of image: Photos or full color graphics may require a longer press time than vector images or text Type of garment: Cotton, Polyester, and Spandex material all respond differently to heat. All instructions are based on cotton garments Toner Coverage: Halftones in image may cause undesired results. Toner coverage should not be less than 60%, otherwise there will be issues with transferring the adhesive to the transfer sheet. Halftones can be corrected when using the white overprint feature in the RIP. This will help with toner coverage and proper adherence to the garment. Consult the iColor® knowledge base for specific instructions on a variety of transfer paper offered at: http://www.iColorprint.com/support Technical Support Email: support@icolorprint.com Technical Support Phone: 631‐590‐1040, Option 2 14 ...
Page 15
iColor® 600 System Specifications Print Speed: Print Speed: Letter/A4 – up to 35 ppm Color and Monochrome; Tabloid/A3 – up to 20 ppm (Transparency setting speeds may vary) Processor: 800 MHz Duty Cycle: Up to 75,000 pg/mo. Duplex: Optional Memory: Standard 256 MB; maximum 768 MB Resolution: 1200 x 600 Emulation: PCL® 6, PCL 5c; PostScript® 3™ Operating Systems: Microsoft® Windows® 8, Windows 7, Windows Vista®, Windows XP, Windows Server 2008, Server 2008 R2 x64, Server 2003; Mac® OS X 10.5 and higher Interfaces: 10/100‐TX Ethernet, High Speed USB v2.0 Multipurpose Tray: Standard 100‐sheet; handles transfer media, card and mailing label stock Paper Cassette: 400‐sheet Legal/Letter/Universal Paper Sizes (Min./Max.): A3, Tabloid, A4 (LEF), A4 (SEF), Letter (LEF), Letter (SEF), A5, Legal 13/13.5/14, Executive Paper Weight: Main Tray 17 lb. bond – 54 lb. bond/ 80 lb. cover (64 – 220 gsm); 2nd and 3rd Trays 17 lb. – 47 lb. bond (64 – 176 gsm); Multi‐purpose Tray 17 lb. bond – 140 lb. index (64 – 256 gsm); Duplex 17 lb. – 54 lb. bond/80 lb. cover (64 – 220 gsm) Size: (WxDxH): 17.6" x 21.7" x 14.2" (449 mm x 552 mm x 360 mm) Weight: 81.6 lb. (37 kg) Power: 120v 15 ...