Uninet iColor 550 Quick Start Manual

1. Unpack the machine, check all
components and remove
the orange tape from all sides.
Then open the top lid.
Only connect the Printer to the PC when prompted to by the software.
4. There are three possible configurations of the iColor 550. These coincide with the 'Print Queues' in the iColor ProRIP (Step 13).
Standard CMYK

Quick Start Guide

for the iColor 550
2. Remove the white toner cartridge. Remove protective foam from inside
the machine and protective film from the white cartridge and reinstall.
3. Using the provided USB drive, install the driver.
Refer to the User Manual for selecting the appropriate driver.
Printing
REAR
Cyan
Magenta
Yellow
Black
FRONT
5. Install the iColor ProRIP (stored on the provided drive)
Spot Color
Overprinting
REAR
Cyan
Magenta
Yellow
White/Clear
FRONT
sales@icolorprint.com www.icolorprint.com
Spot Color
Underprinting
REAR
White/Clear
Magenta
Yellow
Cyan
FRONT