Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Uninet DTF 100
Summary of Contents for Uninet DTF 100
- Page 1 USER MANUAL Date Version Language 12/08/2022 English pg. 1 UNINET DTF 100...
-
Page 2: Table Of Contents
PLACEMENT OF PRINTER……………………………………………………………………………………………………………………………………………………11 INSTALLING THE PRINTER…………………………………………………………………………………………………………………………………………………..11 MATERIALS…………………………………………………………………………………………………………………………………………………………………………12 BUTTONS……………………………………………………………………………………………………………………………………………………………………….……12 PRINTING PLATFORM…………………………………………………………………………………………………………………………………………………………12 BEFORE TURNING ON PRINTER…………………………………………………………………………………………………………………………………………..13 FIRST TIME START-UP…………………………………………………………………………………………………………………………………………………………13 DRIVER INSTALLATION……………………………………………………………………………………………………………………………………………………….13 INK INSTALLATION………………………………………………………………………………………………………………………………………………………………15 INK CONSERVATION…………………………………………………………………………………………………………………………………………………………...16 INSERTING FILM………………………………………………………………………………………………………………………………………………………………….17 DO NOT STOP THE PRINTER………………………………………………………………………………………………………………………………………………..18 CLEANING & MAINTENANCE………………………………………………………………………………………………………………………………………………19 PC REQUIREMENTS…………………………………………………………………………………………………………………………………………………………..…21 TROUBLESHOOTING…………………………………………………………………………………………………………………………………………………………...21 pg. 2 UNINET DTF 100... -
Page 3: Warning
IT IS RECOMMENDED THAT ALL THE STAFF THAT WORK WITH AND / OR WHO ARE RESPONSIBLE FOR THE USE AND MAINTENANCE OF THE SYSTEM CAREFULLY READ THIS MANUAL AND BE FAMILIAR WITH THE NECESSARY PRECAUTIONS, OPERATIONAL AND MAINTENANCE PROCEDURES. pg. 3 UNINET DTF 100... -
Page 4: General Safety Precautions
• This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor. pg. 4 UNINET DTF 100... - Page 5 If irritation to eyes or skin persists, obtain or your household waste disposal service. medical advice immediately. (EEA: Norway, Iceland and Liechtenstein) Never touch the electrical contacts on a Print Head or • pg. 5 UNINET DTF 100...
-
Page 6: General Information
With high print speeds and exceptional resolution, the UNINET™ DTF 100 can print high-quality photos and vector graphics using RIP Software. To make sure you get all the benefits from your UNINET™ DTF 100 please read all the pages that follow. -
Page 7: Warranty
RESPONSIBILITY The total liability of UNINET™ cannot, in any case, exceed the value of the defective, damaged or not delivered goods, calculated on the basis of the prices charged on the invoice. UNINET™ cannot be held liable for damages of any kind arising from failure to fulfil its obligations due to force majeure (strikes, accidents, disasters, etc...). -
Page 8: Instructions For Use
This Operation and Maintenance Manual provides basic information for using the printer UNINET™ DTF 100. It describes how to remove the printer from the box, select and load print media, install the RIP printing (optional) on your computer and choose the software settings for the best printing results. -
Page 9: Read This First
• If you are experiencing personal injury, property damage and / or faults caused by misuse of the products and / or aftermarket parts and / or different from those recommended in the specific operating and maintenance or UNINET™. pg. 9... -
Page 10: Placement Of Printer
PLACEMENT OF THE PRINTER This printing system must be placed in a dedicated environment, air-conditioned throughout the year with a temperature range of 60°F to 80°F, with relative humidity controlled between 42% and 60%, non-condensing, away from direct sunlight sun, dust and dirt, vibration-free, protected from mechanical impact and / or shock. -
Page 11: Materials
MATERIALS Products provided with the printer. • Waste Bottle • Syringes with 14” Gauge Tips • Humidity Sensor • Printing Platform Tray • Epson Driver • RIP Software BUTTONS Controls of the printer on the front are as follows: • Power Button: Turns the printer on and off indicated by the green light above it. •... -
Page 12: Before Turning On Printer
BEFORE TURNING ON THE PRINTER Before you begin printing with your new unit there are a few things that need to be done. Check over the following instructions before powering the machine up. • The printer and black metal platform are both on a stable and level surface. •... - Page 13 Next, the Epson Printer Utility Setup window will appear. Uncheck the boxes next to “Set as default printer” and “Automatically updates software”. You do not want to accept any updates that come directly from Epson as it can cause software issues due to the updates not accounting for DTF functions, any future updates from Epson must be declined.
-
Page 14: Ink Installation
INK INSTALLATION The steps below will walk you through the process of filling all the ink for your new printer. You will need: one bottle of cyan, magenta, yellow, black and white ink. It is also recommended you use the syringes and green tips to fill the ink tanks; keep in mind you will need one syringe with a tip for each color to avoid ink contamination. -
Page 15: Ink Conservation
5. Download and install the WIC Reset Utility software: https://wic-reset.com/files/wicreset.zip Once installed, select your UNINET™ DTF 100 printer from the list on the left-hand side. Expand the Cleaning section to view all available options. Since this is the first time ink has been put into the printer, the ink needs to be pushed through all the lines and printhead to the waste bottle. -
Page 16: Inserting Film
INSERTING FILM Follow the steps below to properly insert the film into your printer. 1. Verify all packing tape has been removed from the printer. 2. Fully extend the black flap located on the top of the printer, it extends a maximum of three tiers. -
Page 17: Do Not Stop The Printer
DO NOT STOP PRINTING UNLESS NEEDED If you have an image that is already printing but need to stop it in the middle of the job, it is not recommended to disrupt the printing process. It is recommended to let the print job complete if the image or job is small. -
Page 18: Cleaning & Maintenance
2. Using the WIC Reset Utility software: https://wic-reset.com/files/wicreset.zip Select your UNINET™ DTF 100 printer from the list on the left-hand side. Expand the Cleaning dropdown list, this will present you with a couple different functions to perform. For this situation, select either the Medium or Normal option from the dropdown list next to Head Cleaning. - Page 19 Weekly to Do After a good week of printing, it is extremely important to set a couple minutes aside to be able to perform the weekly maintenance. There are two components that need attention, one being the capping station while the other is the wiper blade. Both the capping station and wiper blade are located under where the printhead carriage sits when idle.
-
Page 20: Pc Requirements
Problem: Prints are clear on one side but blurry on the other, also applies to same problem front to back. Solution: The UNINET™ printer has to be on a level surface to print correctly across the whole surface of the film.