Sharp AE-X15PU Service Manual page 41

AE-X15PU
[2] DISASSEMBLY OF CONTROL UNIT
1. Control unit box's Approach to decomposition
1) Unscrew the 2 screws and remove the terminal board.
2) Unscrew the 2 screws fixing the terminal angle and remove it.
3) Remove the metal cover.
4) Unscrew the 8 screws fixing the control board unit and remove it
control cover
5) Unscrew the 4 screws fixing the Heatsink holder and remove it.
Heat sink holder
6) Remove 1 screw and the 2 metal covers.
7) Unscrew the 4 screws fixing the Heatsink and remove it from
Heatsink holder
5 – 4
Metal cover