Table of Contents
Advertisement
C: DISASSEMBLY
1. LHD MODEL
S701632A0601
1) Remove thermistor (A) from intake unit case.
2) Remove some screws then separate intake unit
case.
3) Remove thermistor from clip with the evapora-
tor.
4) Remove the block expansion valve (A) from
pipes.
INTAKE UNIT
S701632A06
S4M0503A
S4M0504A
AC-37
HVAC System (Heater, Ventilator and A/C)
2. RHD MODEL
S701632A0602
1) Remove some screws, then separate intake
unit case.
2) Remove thermostat (A) from lower case and
then detach evaporator (B).
3) Disconnect the connection between the expan-
sion valve and pipe from receiver drier.
4) Remove the expansion valve (A) from pipes.
CAUTION:
If evaporator is replaced, add appropriate
amount of compressor oil to evaporator. <Ref.
to AC-25 REPLACEMENT, Compressor Oil.>
D: ASSEMBLY
S701632A02
Assemble in the reverse order of disassembly.
CAUTION:
Replace O-rings with new ones, and then apply
compressor oil.
S4M0214
S4M0215A
S4M0216A
Advertisement
Table of Contents
