Table of Contents
Advertisement
RECEIVER DRIER
HVAC System (Heater, Ventilator and A/C)
14. Receiver Drier
S701283
A: REMOVAL
S701283A18
1) Disconnect ground cable from battery.
2) Using refrigerant recovery system, discharge
refrigerant. <Ref. to AC-19 OPERATION, Refriger-
ant Recovery Procedure.>
3) Disconnect pressure switch harness (A).
4) Disconnect pipe (B).
5) Loosen mounting bolts (C) to remove receiver
dryer.
H4M1263A
CAUTION:
The receiver drier contains a desiccant. After
disconnecting receiver drier, plug it to avoid
moisture.
If receiver drier is replaced, add appropriate
amount of compressor oil to the compressor.
<Ref. to AC-25 REPLACEMENT, Compressor
Oil.>
B: INSTALLATION
S701283A11
1) Install in the reverse order of removal.
CAUTION:
Replace O-rings with new ones, and apply
compressor oil.
2) Charge
refrigerant.
<Ref.
to
AC-20
OPERATION, Refrigerant Charging Procedure.>
AC-35
Advertisement
Table of Contents
